PLA, ABS, PET-G - which one is right?

PLA, ABS, PET-G - which one is right?

PLA, ABS, PET-G - three favorites that are not missing in the equipment of probably any 3D printing fan. But if you often wonder which filament you should use before printing, we have put together this article just for you. In it you will find a comparison of these three frequently used fibers, a summary of their properties and tips for their use.


The magic of flexible materials and the Shore scale

The magic of flexible materials and the Shore scale

Have you already tried printing with basic filaments such as ABS or PLA and are now attracted to flexible materials? Then you are in the right place. Whether flexible filament is an unexplored area for you or you have already had the honor of using it, in the article you can read, among other things, what are the advantages and disadvantages of flexible filament and what the Shore scale (hardness scale) indicates.


Why choose a printing pad with a textured surface

Why choose a printing pad with a textured surface

Are you thinking that a textured surface printing pad could be the right one for printing your models? So you will definitely be interested in what it has advantages and disadvantages, and what to focus on before you start printing.


Výměna nFEP folie

Výměna nFEP folie

We would all like every print to be the same without tedious setup. Start simple, set up a profile, pick up the hardware and every print will be the same! In this article we will look at the hardware, specifically the nFep foil.


Best upgrade for Prusa i3 MK3S/MK3S+

Best upgrade for Prusa i3 MK3S/MK3S+

Nothing is so perfect that it cannot be improved. And this also applies to such a high-quality printer as the Prusa i3 MK3S/MK3S+ 3D printer. In the article you will find a summary of the most interesting upgrades that will make printing on this printer a little more fun.


Magigoo adhesives - the solution to adhesion problems

Magigoo adhesives - the solution to adhesion problems

We would probably all like to be able to wave a magic wand and all problems with the adhesion of prints to the printing mat would be solved at once. Unfortunately, we don't have such a magic wand, but Magigoo brand glues are on his heels.


3D Printer Bed Adhesion

3D Printer Bed Adhesion

Are your prints not sticking to the mat? Think you've tried everything and the printer will fly out the window? We have a few tips for you that have worked for us in our prototype workshop. There is plenty of advice on how to degrease the mat and then it goes by itself, but we will give you specific tips.

Next