Resin for 3D printers

HARZ Labs: after print

Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended. Casting resins may not be cured for longer than 30 minutes.

How to use HARZ Labs UV resin for casting

Recommended procedure for firing Dental Cast Cherry resin. You should follow these recommendations when creating a model for printing.

How to properly clean the tray of an SLA printer

SLA 3D printers can create high-quality prints with a smooth and sharp texture by curing the resin with light (it can be with a laser or a digital projector). Therefore, SLA printers are becoming more and more popular. But you also need to think about cleaning the printer properly. If you are confused, this article will try to shed some light on the issue of cleaning the tray of an SLA printer.

HARZ Labs resin postprocessing

HARZLabs Psyresin Correct Post-Process Chart.

Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.

Print settings for SLA printers

How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.