Výměna nFEP folie

We would all like every print to be the same without tedious setup. Start simple, set up a profile, pick up the hardware and every print will be the same! In this article we will look at the hardware, specifically the nFep foil.


3D Printer Bed Adhesion

3D Printer Bed Adhesion

Are your prints not sticking to the mat? Think you've tried everything and the printer will fly out the window? We have a few tips for you that have worked for us in our prototype workshop. There is plenty of advice on how to degrease the mat and then it goes by itself, but we will give you specific tips.


Chemical resistance of filaments

Chemical resistance of filaments

One of the first things you will start with before you start printing on your 3D printer will be choosing your filament. And sometimes prints need to be functional and durable in addition to the aesthetic side. Which affects, among other things, how chemically resistant they are. In the article, you will find the answer to what chemical resistance is, as well as to how chemicals act on specific filaments.


Surface treatment of ABS / ASA using acetone and other techniques

Surface treatment of ABS / ASA using acetone and other techniques

ABS and ASA filaments are among the popular materials used for 3D printing. It is a relatively durable material that has a wide range of uses. And one of the reasons why ABS or ASA have become so popular is their easy post-processing. Acetone can handle it easily. But there are more ways to get a smooth and shiny print. And we will gladly cover them for you in the article.


Tips for finishing PET-G filament prints

Tips for finishing PET-G filament prints

PET-G filament is a popular material that can be used by home craftsmen and in the industrial sector. If you're wondering about its finish after extrusion, you're in the right place. In the article, we will give you tips on sanding, polishing, spraying and treatment with chemicals.


How to choose the right stepper motor

How to choose the right stepper motor

Thanks to their affordability and simple installation and service, stepper motors have become a popular drive for many machines. If you're wondering which stepper motor to choose, you'll be a little wiser after reading this article.


How to choose a suitable printing pad

How to choose a suitable printing pad

The printing pad is one of the basic building blocks of every 3D printer. In order for the print to succeed according to your wishes, it is necessary to choose the right printing mat that will suit the type of filament used. And because there are countless printing pads, we will be happy to advise you on the choice in the article.


Frequently asked questions about 3D printing

Frequently asked questions about 3D printing

Whether you want to start 3D printing for the first time, or you are already more knowledgeable in the world of 3D printers, you are sure to have a head full of questions. We have summarized the answers to the most frequently asked questions in one article.


Glossary of terms from 3D printing world

Glossary of terms from 3D printing world

3D printing is a unique world that can absorb you. But sometimes knowing it can be a problem. And that is why we have prepared a dictionary of terms from the field of 3D printing for you, which will help you to get your bearings in 3D printing a little better and take you a little further. And because the world of 3D printing is extensive, we will continuously add and update the dictionary.

Next