Materials for 3D printing - Color - Black
Filament 3D power PET-G - black 1kg
Color | Black |
---|
Filament 3D power PLA - black 1kg
Color | Black |
---|
Sharplayers Basic UV resin 1L + free resin filter
HARZ Labs Industrial ABS Resin
Color | Black |
---|
Filament Abaflex PLA - black 750g 1,75mm
Color | Black |
---|
Filament PM ABS - black (1.75 mm; 1 kg)
Color | Black |
---|
Filament Abaflex PLA for Bambu Lab - black 750g 1,75 mm
Color | Black |
---|
Filament REFILL Abaflex PLA for Bambu Lab - black 750g 1,75 mm
Color | Black |
---|
TreeD Filaments Insulating ABS ESD - Black (1.75mm; 0.750kg)
Color | Black |
---|
Filament Abaflex PLA - black 1kg 1,75 mm
Color | Black |
---|
Filament REFILL Abaflex PLA - black 1kg 1,75 mm
Color | Black |
---|
Filament Regshare PETG (1,75 mm; 1 kg)
Filament Regshare ASA (1,75 mm; 1 kg)
Filament Regshare PLA (1,75 mm; 1 kg)
What are the brands of filament?
What are the brands of 3D printing filament and what are their printing results?
Filament drying and storage
Unprotected filament absorbs the humidity in the room and gradually loses its quality. Printing from damp filament is of poor quality and often does not come out at all. This article tells you what to do if your filament gets wet and how to prevent it.
HARZ Labs resin postprocessing
HARZLabs Psyresin Correct Post-Process Chart.
Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.
Print settings for SLA printers
How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.
How to use HARZ Labs UV resin for casting
Recommended procedure for firing Dental Cast Cherry resin. You should follow these recommendations when creating a model for printing.
HARZ Labs: after print
Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended. Casting resins may not be cured for longer than 30 minutes.