Hard resin for SLA printing with very little odor, hardness 85-88D (approx. as a safety work helmet), cured under 405 Nm LED UV. Colors can be mixed to achieve new shades. Details on printing and material are available in the technical sheet.
In case of experience with this type of resin, for example from Anycubic or Elegoo, we guarantee the same functionality and quality. More
Hard resin for SLA printing with very little odor, hardness 85-88D (about the same as a safety work helmet) , cured under 405 Nm LED UV. Colors can be mixed to achieve new shades. Details on printing and material are available in the technical sheet. If you have experience with this type of resin, for example from Anycubic or Elegoo, we guarantee the same functionality and quality. span>
The material should not come into contact with eyes, skin or clothing, it must not be ingested or tasted. Avoid contact with children and animals. The material is not suitable for contact with food or drink, use in medicine or contact with the human body. Packaging and remnants of material/prints must be treated as hazardous waste - only throw them into the containers designated for this purpose.
Quality raw materials are used for the production of Sharplayers Basic resin to achieve high quality and problem-free printing. The properties of the material allow you to mix different colors and thus achieve shades according to your requirements.
Recommended use
figures
hobby printing
models
prototypes
and wherever high details need to be achieved. Resin is suitable for most types of SLA printers (Anycubic, Elegoo, Pruša printers, etc.).
Resin is a liquid photosensitive material made of resin - a photopolymer cured by UV light. Before purchasing, check the value of the wavelength at which the resin cures - in this case it is 405 nm. Resin prints after curing acquire high strength, unfortunately associated with corresponding fragility when excessive pressure is applied.
