PLA - it is a material of higher strength, it is well printable, the only disadvantage is lower temperature resistance - it cannot withstand immersion in hot water, loses its strength above 60°C and softens around 80°C. It belongs to hard and brittle materials.
The recommended PLA printing temperature is 210 – 225°C. The higher the temperature, the higher the shine of the product.
You can print small and detailed models as well as large ones from PLA. We recommend this material for beginners.
ADVANTAGES OF ABAFLEX FILAMENT:
czech product made on a Czech production line
precise diameter with maximum stability
excellent roundness
guaranteed color fastness
when unwinding the ABAFLEX filament, the individual threads will never cross, so the unwinding will not get stuck
winded on an eco-friendly paper spool
we use raw materials exclusively from Western Europe and North America from suppliers with guaranteed quality and stability of each production batch
you can print both small and detailed models and large prints from PLA
OTHER RECOMMENDATIONS:
If you are not printing, keep the filament dry and out of direct sunlight (e.g. in a box, in a resealable bag together with a "dried" moisture absorber)
When handling the spool, secure the free end of the filament so that the filament does not unravel by itself. You can insert the loose end anywhere around the circumference of the paper roll into the "wave" in the cardboard side.
When 3D printing with all filaments from all manufacturers, we always recommend using a "filament cleaner = cleaning filter", this filter wipes dust and other possible impurities from the surface of the filament. Due to the electrostatic charge, dust particles and other mechanical impurities can stick to the surface of the unwrapped filament and consequently there is a risk of clogging the nozzle.
with a higher temperature, you will achieve a higher gloss and the possibility of faster printing. When printing fragmented and complex products, it is advisable to reduce temperature and speed
TECHNICAL DETAILS OF THE FILAMENT:
max. deviation of the diameter of the filament on the spool: +-0.019 mm
filament circularity: min 94%
net filament weight: 1000 - 1050 g
filament length: 340 - 350 m
PAPER COIL TECHNICAL DETAILS:
weight of empty coil: 95 - 105 g
outer diameter: 200 mm
coil width: 82 - 85 mm
inner diameter of the sleeve: 104 mm
inner hole diameter: 55.6mm
DELIVERY CONTENTS:
a spool with filament
resealable bag + moisture absorber = serves as protection of the filament against the absorption of atmospheric moisture
conveniently closable paper box with inspection hole suitable for storing filament
