Sanding sponge

Gluing 3D printed parts

How to glue parts from a 3D printer? The general rule is to sand the glued surfaces with coarse sandpaper (ideally on a solid surface - a cube) or a sanding sponge. If a larger joint is created, it can also be sanded with instant glue alone. For example, sharpened source material (or dissolved in a chemical) can be used as a filler. However, the use of a sealant or filler is recommended as standard.

Surface treatment of 3D prints

Tips for finishing PET-G filament prints

PET-G filament is a popular material that can be used by home craftsmen and in the industrial sector. If you're wondering about its finish after extrusion, you're in the right place. In the article, we will give you tips on sanding, polishing, spraying and treatment with chemicals.

PLA, ABS, PET-G - which one is right?

PLA, ABS, PET-G - three favorites that are not missing in the equipment of probably any 3D printing fan. But if you often wonder which filament you should use before printing, we have put together this article just for you. In it you will find a comparison of these three frequently used fibers, a summary of their properties and tips for their use.

Magigoo adhesives - the solution to adhesion problems

We would probably all like to be able to wave a magic wand and all problems with the adhesion of prints to the printing mat would be solved at once. Unfortunately, we don't have such a magic wand, but Magigoo brand glues are on his heels.

Surface treatment of ABS / ASA using acetone and other techniques

ABS and ASA filaments are among the popular materials used for 3D printing. It is a relatively durable material that has a wide range of uses. And one of the reasons why ABS or ASA have become so popular is their easy post-processing. Acetone can handle it easily. But there are more ways to get a smooth and shiny print. And we will gladly cover them for you in the article.

Glass printing mat - why to buy it and how to use it

On the market you can find printing pads made of different materials. Each has its advantages and disadvantages. We'll give you some tips on why a glass printing mat might be right for you, and how to make it easy to print on it and with great results.

How to replace and care for PEI foil

Many printing pads in 3D printers are covered with a layer of PEI material, which is a plastic resistant to high temperatures. Although it is a tough material, it is usually very thin and after a certain number of prints, the PEI film will need to be replaced. This article provides you with an overview of how to care for PEI film, prevent its damage, and also how to replace PEI film if necessary.

Frequently asked questions about 3D printing

Whether you want to start 3D printing for the first time, or you are already more knowledgeable in the world of 3D printers, you are sure to have a head full of questions. We have summarized the answers to the most frequently asked questions in one article.

Glossary of terms from 3D printing world

3D printing is a unique world that can absorb you. But sometimes knowing it can be a problem. And that is why we have prepared a dictionary of terms from the field of 3D printing for you, which will help you to get your bearings in 3D printing a little better and take you a little further. And because the world of 3D printing is extensive, we will continuously add and update the dictionary.