Putty for plastic for 3d printing More
Polyester, two-component putty putty.
It is intended for base sealing of damaged surfaces. It is characterized by easy sanding and at the same time excellent adhesion to problem welds.
It can also be used on standard surfaces such as galvanized steel, stainless steel, aluminum, non-ferrous metals, wood, polyester surfaces, etc.
Dries quickly and can be sanded easily when dry with P120-240 grit sandpaper.
Can be used on:
- Metals
- Galvanized metals
- Wood
- All types of filament
- All types of resin
Advantages over other brands and sealants:
- Easy to sand
- Does not soften
- Long durability of both components (especially)
- Resin putty, resin putty
- Hardens according to the added amount of hardener it can be sanded within a few minutes after application at 10%
Polyester two-component anti-corrosion sealant with a fine consistency for sealing unevenness of metal, wooden and mainly plastic surfaces and resin.
Before use, mix thoroughly with hardener in a ratio of 100:3 (100% putty, 3% hardener).
Dries quickly (15-20min/20°C), can be lightly sanded when dry with sandpaper P 80-120 and creates a non-porous smooth surface.
Weight | 1000 g |
---|