The non-stick layer on the nozzle guarantees trouble-free printing of even more complex materials. More
Improved E3D Volcano nozzle coated with a non-stick Teflon layer
Compatible with E3D Volcano hotends.
A brass nozzle that all printers will appreciate. The non-stick layer prevents the formation of blobs, precisely because blobs are formed during printing on the lower part of the nozzle so that the material is gradually packed on it.
When such a blob then acquires and falls from the nozzle into the printout, it causes a layer-shift, an ugly surface, or another undesirable problem.
Another advantage is that the nozzle remains clean for a much longer time. So you don't have to "burn nozzle with hell-flame" every now and then. :)
Nozzles with a Teflon layer are available in the following sizes:
0.2 mm
0.3 mm
0.4 mm
0.5 mm
0.6 mm
0.8 mm
1.0 mm
Everyone chooses their Teflon nozzle.
radekh
PositivesTeflon opravdu zamezuje ulpívání filamentu na trysce.
PositivesTeflon opravdu zamezuje ulpívání filamentu na trysce.
NegativesNa úplné špičce trysky teflonový povlak nevydržel moc dlouho, ale na většině plochy drží a hlavní funkcí stále plní. Snad vydrží.
NegativesNa úplné špičce trysky teflonový povlak nevydržel moc dlouho, ale na většině plochy drží a hlavní funkcí stále plní. Snad vydrží.