TreeD Filaments Structura MA - black (1.75 mm; 1 kg) with glass fibers More
MA structure
Structura MA was created to combine light properties with high mechanical strength.
Thanks to the addition of carbon fiber. able to produce structural supports with more advanced geometries and overcome more structural challenges than ever before.
Structura MA is ideal for:
- Prosthetics of upper and lower limbs
- Supports mobility
- Structural load-bearing elements
- Exoskeletal elements
Recommended print settings:
- Nozzle: 230-245°C
- Substrate: 60-70 °C
- Minimum nozzle width: 0.45 mm
- Print Blow: 0 - 10%
- Print speed: 35 - 45 mm/s
Parameters (at 23°C / 50% RH):
- Density: 1.05 g/cm3
- Melting point: 178°C
- Tensile modulus: 6200MPa
Datasheet and chemical resistance in the Download link
Parameters
Color | Black |
---|---|
Weight | 1000 g |
Filament diameter | 1,75 mm |
Download
MSDS STRUCTURA MA.pdf (pdf, 1 MB)
Structura-MA.pdf (pdf, 78.3 kB)