TreeD Filaments Clay - clay (1.75mm) More
Clay
- CLAY is developed specifically for architecture, design and archeology fields.
- Polymers are mixed with clay powders to easily realize architectural objects.
- Clay-Finish your items with an exceptional tactile feel.
- Polish your items with fine sandpaper and water. No more issues with removing support.
Recommended print settings:
- Nozzle: 220-240°C
- Substrate: 90-110 °C
- Minimum nozzle width: 0.35 mm
- Print Blow: 0 - 20%
- Print speed: 60-70 mm/s
Properties:
- Tensile modulus: 2500MPa
Datasheet and chemical resistance in the Download link
Parameters
Color | Red |
---|---|
Weight | 750 g |
Filament diameter | 1,75 mm |
Download
ARCHITECTURAL.pdf (pdf, 101.5 kB)