Aluminum sleeve for the end of the belt with a diameter of 6 mm More
3d Printer Belt End
Dimensions:
- Inner Width: 5.4mm
- Inner Height: 2.7 mm
- Wall thickness: 1 mm
- Total length: 9 mm
Usage:
- Pinch the end of the belt lightly with your fingers and slide the sleeve onto the belt, at least 9 mm.
- Take a narrow pair of pliers or a pair of pliers and squeeze the clutch in the direction of the belt.
- If the clutch one side breaks, squeeze the sleeve from the sides to prevent the belt from slipping
- If both tents break and the sleeve splits in half, be more careful when trying a new sleeve again.
Suitable not only for printer belts:
- FlSun
- Ender
Parameters
Width of belt | 6 mm |
---|