Improve printing with magnetic pad for 3D printers, easy installation and removal of printing. Resistant to high temperatures and without the need for adhesives. More
The pad has a slightly beveled corner/corners. For 99% of prints, damage will not affect it.
The magnetic mat is a practical and very functional improvement of your 3D printer. The product consists of two parts. The first part with a self-adhesive layer is firmly stuck to the printer plate or to the glass, the second part consists of a backing that can be removed and reused after printing.
For printing with this the pad does not require any other adhesive product, however, for higher success it is advisable to use 3DLAC.
The board is long-term resistant to temperatures up to 130 °C, short-term then 180 °C. Above 130 °C, the pad may partially lose its magnetic effects for a short time.
Dimensions: 235mm x 235mm
Suitable for example for printers:
Anet A2/A6/A8
Wanhao i3
Creality CR-20
Creality Ender 3
Creality Ender 4
Creality Ender 5
Geeetech A10/A20M
Tevo Tarantula Pro
FELIX Printers Pro 3
Two Trees Sapphire Pro S1
Two Trees Bluer
Alex D
star 1star 2star 3star 4star 5Rating value is 4 of 5
PositivesBezproblemova instalace
Povrch dle popisu
PositivesBezproblemova instalace
Povrch dle popisu
NegativesV popisu nepatrne chybi, ze se to nema odmastovat acetonem.
A az/jestli ta poznamka tam bude tak VELKYM PISMEM :)
NegativesV popisu nepatrne chybi, ze se to nema odmastovat acetonem.
A az/jestli ta poznamka tam bude tak VELKYM PISMEM :)
