Adhesive glue for 3d printing - Magigoo ULTEM, Magigoo PEI 1010, Magigoo PEEK, Magigoo PPS
Ideal for materials: basic materials such as PEEK, ULTEM, PEI, PPS
Why Magigoo?
MAGIGOO is an easy-to-use liquid "glue" to increase the adhesion of the first layer when printing. Good adhesion of the first layer is important because this layer forms the basis of the entire print. MAGIGOO is water soluble, so you can easily remove it after printing. After each print, we recommend removing the glue with a damp cloth, this will prevent excess accumulation of MAGIGOO glue on the printing surface.
The package is enough for about 100 applications.
Instructions for use:
Removing the sealing foil
Before the first use, remove the wheel from the seal, which prevents the product from drying out and spilling. Unscrew the cover of the applicator and remove the sealing foil.
Application of the product
Shake the adhesive thoroughly before each use. Apply a continuous thin film to the printing pad. This will ensure the adhesion of the print to the mat.
Print the model
Magigoo glue can be used for printing with both heated and non-heated substrates.
Removing the model from the mat
Once the print surface has cooled, you can easily remove the print.
