Aluminum profile, hexagonal 30 mm (custom cut) according to the selected length in mm. Groove 8 mm. Tolerance +/- 0.5 mm.
The preparation time for custom aluminum profiles depends on the quantity of pieces and workload, but usually does not exceed 3 working days. More
Hexagonal aluminum profiles 30 mm groove 8 mm (custom cut) according to the selected length in mm. A 30 mm aluminum profile can be added to the basket based on the specified length.
- Core diameter: 5,5 for M6 thread.
- Groove: 8 mm
- Cutting tolerance: +/- 0,5 mm
- Material: EN AW-6063
- Manufacturing tolerance: DIN EN 12020-2
- Weight: 1,73 kg/m
Accessories and fasteners
Almost all available accessories can be used for aluminum profiles 30 mm. The basic parts are:
- Corner connectors and angles - most often used to connect profiles to each other
- T-slot nuts - thanks to hammer nuts and stones it is possible to place all accessories without drilling and with the possibility of disassembly
- Covers, handles, legs, washers and other accessories...
Transport of aluminum profiles
Aluminum profiles often exceed the limits of common carriers. Please keep in mind the following carrier limits when choosing transport.
- Packeta - maximum length of profiles approx. 650 mm
- DPD - maximum length of profiles approx. 1650 mm
- GLS - maximum length of profiles approx. 1980 mm
- Longer profiles can only be sent by TopTrans or Raben
All current options can be found in the basket when ordering, or a custom offer can be prepared for larger orders.
According to Act 89/2012 Coll. § 1837 letter D this item is non-returnable
Slot type | T-SLOT |
---|