Dental resin HARZ Labs Yellow Clear resin for dentists More
HARZ Labs Dental Yellow Clear Resin
Certified for healthcare use.
Quality resin for printing translucent models, usable as dental guards, surgical preparations and in dental fillings.
Dental Yellow Clear is a hard PMMA-like resin made from a biocompatible material. It has high hardness (Shore D 92) and high tensile strength. The very mild odor and the absence of dangerous monomers allow it to be used even in a small laboratory. High fluidity guarantees simplicity of operations such as pouring and cleaning. Virtually zero shrinkage ensures absolute dimensional accuracy. The material does not contain any irritating substances. The material is hard and strong, so there will be no damage to the model when removing it from the printing mat. Prints withstand impacts, scratches and extensive mechanical stress.
Hardness (Shore) | 87-90D |
---|
HARZ Labs resin postprocessing
HARZLabs Psyresin Correct Post-Process Chart.
Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.
Print settings for SLA printers
How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.