Dental resin HARZLabs A1-A2 resin for dentists More
HARZ Labs Dental Sand Resin A1-A2
Certified for healthcare use.
Designed for printing crowns and bridges (temporary). The material is highly resistant, non-irritating. the resin is odorless.
Dental Sand is a resin similar to PMMA with ceramic microfilling, made of biocompatible material, with a color corresponding to A1, A2, A3 and Bleach (by Vita scale). It has high durability (Shore D 90) and high tensile strength, resistant to mechanical and chemical stress. Recommended for printing temporary crowns and bridges. Odorless and the absence of dangerous monomers enables printing even in a small laboratory. Meets iso 10993 standards.
Color | Beige |
---|---|
Hardness (Shore) | 90-92D |
HARZ Labs resin postprocessing
HARZLabs Psyresin Correct Post-Process Chart.
Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.
Print settings for SLA printers
How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.