HARZ Labs Dental Bleach Resin

HARZ Labs Dental Bleach Resin

Certified for healthcare use.

Ceramic resin for printing temporary crowns and bridges with Bleach color according to Vita scale.

It has increased abrasion resistance and polishes well. Protective sprays are recommended before use. Resin has good adhesion to cement when installed on the frame. Color depends on curing time. High fluidity guarantees simplicity of operations such as pouring and cleaning. The material is absolutely non-toxic and odorless, so there will be no need for print shop ventilation. The material can withstand exposure to aggressive chemicals. Virtually zero shrinkage ensures complete dimensional accuracy. The material does not contain any irritating substances. Made from biocompatible materials. The material is hard and strong, so the model will not be damaged when removing it from the printing mat. It will last several months in the printer without any problems. Prints withstand impacts, scratches and extensive mechanical stress.

Detailed print settings for your printer can be found here.

The resin has a relatively low viscosity. Reduces alignment time, is easy to clean and provides maximum accuracy in minimum time.
	The resins are odorless and do not cause any irritation, so you can work with natural ventilation without special techniques.
Reducing less than 0.5% will give you the same model size as the 3D model on the computer.
	The resin does not contain solvents and volatile monomers, irritating compounds. No fumes, no smell and does not cause an allergic reaction
The resin is very stable, you can leave it in the tub for a long time, it does not sediment and gel. Stable color depends on curing time, A1 or A2 Vita can be achieved.
	The resin is hard and tough, it reaches 82 Shore D hardness, it is not brittle, you will never damage the model separating it from the base/support.
The resin is UV stable. It will not warp even in direct sunlight. It will maintain its dimensions regardless of external influences.