HARZ Labs Basic Resin red

More photos (6)

Availability

Product is no longer available We will inform you about the delivery date.

Manufacturer

Product code

801

Professional resin for SLA printers More

Description
Articles2

HARZ Labs Basic resin red

Very high quality material for ordinary prints on SLA 3d printer - LCD and DLP. The resin is odorless, prints are strong, high quality and dimensionally accurate.

Basic Resin by HARZ Labs is ideal for complete beginners. It is non-toxic and completely odorless, making it an ideal material for printers in offices and schools. Working with the material is very simple thanks to its high fluidity, and cleaning the printer and prints is carefree.

The resin has a relatively low viscosity. Reduces alignment time, is easy to clean and provides maximum accuracy in minimum time.
	The resins are odorless and do not cause any irritation, so you can work with natural ventilation without special equipment.< /span>
A reduction of less than 1% will give you the same size the model as a 3D model on the computer.
	The resin does not contain solvents and volatile monomers, irritating compounds. No fumes, no smell and does not cause an allergic reaction< /span>
The resin is very stable, you can leave it for a long time in the tub, there is no sedimentation and gel formation - no need to stir and it does not settle.
	The resin is hard and tough, it reaches the hardness of 82 Shore D, it is not brittle, you will never damage the model , which separates it from the pad/support

Parameters

Color	Red
Hardness (Shore)	80-85D

Download

Basic resin.pdf (pdf, 3.4 MB)

MSDS Basic Resin en.pdf (pdf, 1.8 MB)

Basic.pdf (pdf, 1.9 MB)

HL-Brochure-CZ_Verze.pdf (pdf, 6.8 MB)

HARZ Labs resin postprocessing

HARZLabs Psyresin Correct Post-Process Chart.

Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.

Print settings for SLA printers

How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.