Flows and 2nd quality PLA filament

This is a 2nd-quality material - the string may become discolored, slightly dirty, or it may be overflow spools - it contains filament of two or more colors and a part where the so-called overflow occurs

PLA runs and 2nd quality are spools with filaments that were not included in the standard sale due to color variation, worse winding, or poor weight. As a rule, there are 2-3 colors, but it can also be a single-color coil with a slight deviation from the standard shade.

These aspects have no influence on the quality of the filament. The material is otherwise completely standard, the string diameter is OK.

Characteristics of PLA:

• Optimized for FDM(FFF) 3D printers
• Almost zero cooling shrinkage
• Perfect layer adhesion
• Very easy printing
• Can be glued with common glues
• Easy printing i of small and detailed objects
• No smell when printing
• The material is hard and solid
• Biodegradable
• Great for beginners
• Great for prototyping
• May be sensitive to heat
• Hard and brittle
• Not flexible compared to other fibers

Overall, PLA filament is one of the best filaments to work with: it is not sensitive to temperature changes, has a great surface quality and is ideal for printing complex objects.

This material is very popular because it is easy to print and is affordable.
It is a great material for both beginners and advanced.

PLA fiber requires storage in a dry place and out of direct sunlight.
PLA absorbs water easily, which means that in it can become brittle over time if stored in a humid environment.
It can also deform easily if too much heat is applied to it.

PLA filament is commonly used to create complex parts and details, including corners, sharp parts and small parts.
It is often used to create architectural models, aesthetic and concept models and casting molds.

In general, this material is very popular for prototyping.
Because it is usually less expensive than most other materials, manufacturers can a developers to test different prototypes without major investment.
It is also biodegradable, which means you can reduce your impact on the environment.

Benefits of PLA filament
The main advantages of PLA filament are that it can be used in desktop 3D printers, is easy to print at low temperatures, and works with almost all types of adhesives, including cyanoacrylate and specialty plastic adhesives.

PLA is also relatively easy to paint, it is convenient to use a primer.
It is the most commonly used material for printing when someone wants to additionally color the model.

Note:

the material can also be printed on a mat that is not heated. Nevertheless, we recommend (especially for beginners) to set the heating to 55 - 60 °C. The pad must be thoroughly degreased. For example, wash several times with hot spring water. Kores glue stick can also be used on the mat. 3Dlac works perfectly.
The material should be stored in a dry place. Wet filament must be dried at 45 to 50 °C for at least 6 hours.

PLA is optimized for the "Prusament PLA" printing profile.

Parameters:

string weight 1000 g
length approx. 340 m
Diameter 1.75 mm + - 0.05 mm
Print temperature 200 - 220 °C
Pad temperature 40 - 60 °C
Spool with string is vacuum packed.
Made in the Czech republic

Spool dimensions:

weight of empty spool 250 gr (transparent)
weight of empty spool 220 gr (black)
outer diameter 300 mm
shaft hole diameter 55 mm
coil width 70 mm

PLA is a material made from naturally obtained starches and is therefore environmentally friendly. It is very easy to print and therefore ranks among the most popular filaments. In addition, there is no need for a heated substrate for printing, it does not smell and it does not undergo large deformations when the material cools down. Choose from the complete offer of the Czech brand right now!

Made in the Czech republic.
This product is made of virgin granulate.
Does not contain recyclate or other undesirable additives.