Filament PM - 1.75 GlowJet - glow in the dark 0.5 kg
PLA filament GlowJet, glowing PLA, Czech manufacturer Plasty Mladeč. The PM brand is a guarantee of the quality and dimensional accuracy of the PLA filament. The material is biodegradable and suitable for printing large objects. Next to PET-G filament, it is the most used material for 3D printing. Prints at temperatures above 50°C may lose their mechanical properties.
Recommended printing settings PLA Plasty Mladeč:
- Nozzle: 200 - 220°C
- Substrate: 50 - 60 °C Printing settings depend on the printer and printing substrate. PLA filament can be printed without heating the bed.
Parameters:
- Filament length: approx. 165 meters
- Tolerance: 0/- 0.05 mm
- Coil outer diameter: 202mm
- Coil inner hole: 50mm
- Coil width: 90mm
- Coil weight including packaging: 840 g
Tips for PLA filament
ADVANTAGES: simple setup for printing biodegradable material hardness and toughness small shrinkage during printing suitable for printing larger models soluble in sodium hydroxide
DISADVANTAGES: brittleness low heat resistance (softens at a temperature of 50°) unsuitable for outdoor environments, harder to grind
Color | Glowing in dark, Green |
---|---|
Weight | 500 g |
Filament diameter | 1,75 mm |
Material property | Glowing in dark |
Micro Macro
PositivesStandardní PM kvalita. Krabice, vakuované balení.
PositivesStandardní PM kvalita. Krabice, vakuované balení.
NegativesIntenzita světla není tak silná, jde spíš o světélkování.
NegativesIntenzita světla není tak silná, jde spíš o světélkování.