eSUN Water Washable resin
Manufacturer: eSUN Product code: P00453 Shipping and Payment
Resin water washable from eSUN is a water-washable resin and has less odor when printing than classic resin for 3D printers More
About the material:
eSUN water washable resin is water washable, so you avoid using alcohol or acetone, which can irritate the skin. The main advantages of resin from eSUN are high printing accuracy and high resolution even when printing small details that are perfectly visible. Its mechanical properties include balanced toughness, strength and stiffness, low viscosity.
Parameters:
- material: water-washable resin
- viscosity: 110 - 180
- net weight of the product: 0.500 kg
- density: 1.10 - 1.14 g/cm³
- tensile strength: 19 - 46 MPa
- hardness (Shore D): 74 - 82
Grading (1-10):
- strength: 6
- hardness: 7
- forming: 8
- accuracy: 8
- speed: 8
Advantages:
✅ washable with water
✅ accurate printing
✅ high resolution details
✅ great strength and stiffness
✅ low viscosity
✅ high toughness
Disadvantages:
❌longer drying time
❌ more fragile compared to classic resin
Usage information:
Shake well before printing.
The water-washable resin should not be in contact with water for a long time (it will not be harmed by contact with water for a few seconds to one minute). After soaking, the print needs to be dried, ideally with a hair dryer. Do not store in a humid environment with high temperature.
Volume | 500 ml |
---|