Biocompatible PMMA resin, ecologically degradable, highly transparent polymethyl methacrylate More
eSUN PMMA Plexi Resin - transparent
Photosensitive resin that does not harm the environment. Made on the basis of PMMA / plexiglass, suitable for printing models requiring transparency
Advantages of eResin from eSUN:
- High transparency
- Treated against yellowing
- The resulting surface is almost identical to classic plexiglass
- Excellent transparency after surface treatment of the model as polishing or special spraying
- Excellent model detail
- Low shrinkage
- Suitable for printing glasses, lamps, covers, etc.
Parameters of PMMA eResin from eSUN:
- ShoreD hardness 70 < li>Density: 1.05 - 1.15 g/m3
- Viscosity: 300 MPa at 25°C
- Suitable for SLA 3d printers with wavelength: 395-405 nm</li >
- Tensile strength: 58 MPa
- Elongation before breaking: 10%
- Flexural strength: 30 MPa
- Impact resistance: 15 J/m (very brittle)
Summary of resin parameters from 1 to 10Compared to other resins brands, for example HarzLabs or Sharplayers |
|
---|---|
Strength (impact, tensile, bending) | 6 (sub-average) |
Hardness(F) | 7 (diameter) |
Print Shrinkage(P) | 8 (diameter) |
Cure Shrinkage(S) | 7 (diameter) |
Maximum Print Speed(A) | 8 (diameter) |
Recommended print settings | |||
Settings | Type of 3d printer | ||
Low light intensity | Medium illumination intensity | High light intensity (Monochrome LCD) | |
3d printer (examples) | AnyCubic Photon | eSUN LCD 3.0 Nova Bene 4 Creality LD-002R |
Anycubic MONO X ELEGOO Saturn Prozen Sonic Mini |
Exposure Time | 8-10s | 5-6s | 3-5s |
Bottom Layer Count | 3-5 layers | ||
Bottom Exposure Time | 40-60s | 30-40s | 25-35s |
Lifting Distance | 5-6mm or more as needed | 8-12mm or more as needed | |
Lift Speed | 90-150 mm/min | 90-120 mm/min | 80 mm/min |
Retract Speed | 150-200 mm/min |
Parameters
Color | Transparent |
---|