eResin PLA - biopolymer resin for 3d printers - Color: Grey, Volume: 1000 ml
star 1 star 2 star 3 star 4 star 5 (2)Rating value is 5 of 5
Biocompatible PLA resin, ecologically degradable, certified material for the production of toys, bio resin that does not burden the environment More
eSUN PLA BIO Resin - more colors
Photosensitive resin that does not harm the environment. Made of biocompatible PLA material, suitable for a wide range of uses.
Certified resin material for the production of toys - certificate in the Downloads tab
Advantages of eResin from eSUNu:
- High printing accuracy
- Shore hardness 75 - 80D and resistance to scratch
- Moisture resistant
PLA-based resin
- Density: 1.07 - 1.10g/m3
- Viscosity: 100- 270 MPa at 25°C
- Suitable for SLA 3d printers with wavelength: 395-405nm
- Tensile strength: 24-55 MPa
- Elongation before breaking: 24-37%
- Flexural strength: 25-61 MPa
- Modulus of flexural strength: 600-800 MPa
- Impact resistance: 27-40 J/m
Summary of resin parameters from 1 to 10Compared to other resins brands, for example HarzLabs or Sharplayers |
|
---|---|
Strength (impact, tensile, bending) | 6 (sub-average) |
Hardness(F) | 7 (diameter) |
Print Shrinkage(P) | 8 (diameter) |
Cure Shrinkage(S) | 7 (diameter) |
Maximum Print Speed(A) | 8 (diameter) |
Recommended print settings | |||
Settings | Type of 3d printer | ||
Low light intensity | Medium illumination intensity | High light intensity (Monochrome LCD) | |
3d printer (examples) | AnyCubic Photon | eSUN LCD 3.0 Nova Bene 4 Creality LD-002R |
Anycubic MONO X ELEGOO Saturn Prozen Sonic Mini |
Exposure Time | 8-10s | 5-6s | 3-5s |
Bottom Layer Count | 3-5 layers | ||
Bottom Exposure Time | 40-60s | 30-40s | 25-35s |
Lifting Distance | 5-6mm or more as needed | 8-12mm or more as needed | |
Lift Speed | 90-150 mm/min | 90-120 mm/min | 80 mm/min |
Retract Speed | 150-200 mm/min |