Bondtech DDX v3 Upgrade Kit for Creality CR10S Pro / Max 3D Printers

Bondtech DDX Direct Drive eXtruder for Creality 3D Printers

Replaces the original bowden with a direct drive setup. It is a powerful Dual Drive extruder based on BMG extruders.

Multiple Hotends Compatibility

This model was created to be compatible with the original hotend of each Creality model. Users may also upgrade the hotend to Copperhead™ or Mosquito™.

Product Includes:

• Bondtech DDX v3 For Creality
• DDX v3 Adapter Set For Creality CR-10(S)Pro / Max

The DDX v3 is much easier to install

With this integrated fan shroud and mount the DDX v3 is even easier to install.
Snap the fan to the shroud without using screws.
Adjust the height of the shroud with one front access screw.

Using a bed probe with DDX

The DDX was designed to allow space for the bed probe to be attached to the X-carriage. In models where there is no available space to attach a bed probe, like the BL Touch, to the X-carriage - CR-10 Max as example - a mount can be printed and attached to the right hand side of the DDX.

Bondtech DDX Direct Drive eXtruder

This Direct Drive eXtruder from Bondtech is a high performance, high reliability 1,75 mm Dual Drive extruder for Creality 3D printers, based on our very popular BMG extruder. Bondtech’s unique Dual-Drive technology combined with either the factory hotend or for even better performance the industry leading hotends Copperhead™ or Mosquito™ from Slice Engineering, gives you a direct drive extruder with trouble free material feeding and enables the use of a wider range of materials. The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.

Make your 3D printer even better

Bondtech DDX Direct Drive eXtruder for Creality is designed to give the user more options – different materials; higher flow and/or wider nozzles; thinner layers – and achieve a higher print quality. The DDX is based on the BMG Bondtech Mini Geared extruder featuring our unique Dual-Drive technology. The DDX housing design provides an effective Hot-End cooling.  With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved.

Easy To Setup

For ease of setup the kit is attached to the carriage with only 2 screws.

Packing List:

• 1x DDX v3 Extruder
• 1x Nema17 Pancake stepper motor
• 1x Thumbscrew Assembly
• 1x 70 cm Stepper motor extension cable
• 1x 60 cm PTFE tube
• 1x 7 cm Capricorn tube
• 4x Zip-ties
• 3x M3x12 mm screw
• 2x M3x20 mm screw
• 1x M3x10 mm button head screw
• 1x 10079-4 PA12 Fan Shroud
• 1x 10079-44 SLS Bowden Adapter (supplied with a tapered thread to better fit the stock metal threaded push-fit)
• 1x M3x18 mm screw
• 1x M3x20 mm screw
• 2x M3x8 mm screw
• 2x M3 5mm square Nut

The kit is compatible with:

• CR-10S Pro
• CR-10S Pro v2
• CR-10 Max^*1

  ^*1 Using DDX v3 on CR-10 Max

  On the Cr-10 Max the z-height will be limited to in between 430 mm and 455 mm, instead of the original 470.
  This is due to the higher position of the push-fit on our extruder, that forces the bowden to bend at a lower level under the top bar. Use the Z (height) parameter at Machine Settings in the slicer to reflect this lower limit. Select the lower value and fine tune the max Z with testing.

Detailed installation instructions can be found here.