Aluminum profile 30x30 without surface treatment; custom cut

Aluminum profiles 30x30 (cut) according to the selected length in mm.

The profiles do not have anodized surface treatment.

You can add 3030 aluminum profiles with a cut based on the specified length to the basket.

Parameters of AL profile 3030

• Material: EN AW 6060 - AlMgSi0.5
• Cutting tolerance: +/- 0.5 mm
• Standards: EN 573-3 AW 6060 T66 EN 755-1,2,9

Accessories and fasteners

Almost all available accessories can be used for the 3030 linear profiles. The basic parts are:

• Corner connectors and angles - most often used to connect profiles to each other
• T-slot nuts - thanks to hammer nuts and stones it is possible to place all accessories without drilling and with the possibility of disassembly
• Covers, handles, legs, washers and other accessories...

Transport of aluminum profiles

Aluminum profiles often exceed the limits of common carriers. Please keep in mind the following carrier limits when choosing transport.

• Packeta  - maximum length of profiles approx. 650 mm
• DPD - maximum length of profiles approx. 1650 mm
• GLS - maximum length of profiles approx. 1980 mm
• Longer profiles can only be sent by TopTrans or Raben

All current options can be found in the basket when ordering, or a custom offer can be prepared for larger orders.

According to Act 89/2012 Coll. § 1837 letter D this item is non-returnable