Elegoo Mars 3 Pro 3D printer

Elegoo Mars 3 Pro

The Mars 3 Pro resin printer from the Elegoo brand prints with unprecedented dimensional accuracy and very fine details. The 4K 6.6" monochrome display is protected by tempered glass (hardness 9H) and allows a very short exposure time per layer, which helps to drastically increase the efficiency of printing and achieve high printing speed.

Compared to its predecessor, the Mars 3 model, it offers version Pro several improvements, including faster printing speed and better stability. The newly used FEP 2.0 separation film makes it easier to peel off models and improves print quality thanks to high UV transmission. The copper passive cooling system dissipates more heat than other metals.

The Fresnel lens collimator allows the radiation angle up to 5° and thus a uniformity of more than 92%. The edges and corners of the printed models are therefore extremely sharp. The activated carbon in the purifier guarantees effective air purification and prevents the formation of odors from the resin.

4K Monochrome LCD 6.6-inch 4K monochrome LCD screen with a replaceable anti-scratch tempered glass with 9H hardness for a better light transmittance at 4098 x 2560 high resolution, protecting the screen while restoring model details to the greatest extent.
	Powerful COB Light Source Upgraded free-form surface COB lens consists of 36 highly integrated UV LED lights, paired with Fresnel lens to deliver an even beam of 405nm wavelength with 92% light uniformity for a more smooth surface finish and incredible printing quality.
Large Build Volume With a large build volume of 143.43×89.6×175mm , you can print one large model or undergo batch printing in a single job, which saves your time and greatly improves your productivity.
	Designed for Reliability Non-slip hexagon socket leveling screws work with the sandblasted oxide surface build plate for stronger adhesion and more stable printing. PFA release liner with less release tension for a higher printing success rate.
Better Printing Experience The air purifier with a built-in active carbon filter to effectively absorb and filter the resin odor and pungent fumes, giving you a fresh printing experience. Copper heat tubes and a powerful cooling fan with faster heat transfer and better cooling efficiency, extending the life span of 3D printer.

Technical Specifications:

• System: EL3D-3.0.1
• Slicer Software: CHITUBOX
• Connectivity: USB
• Technology: MSLA
• Lightsource: UVLED 405 nm
• XY Resolution: 4098 * 2560
• Z Axis Accuracy: 0.00125 mm
• Layer Thickness: 0.01 - 0.2 mm
• Printing Speed: 30 - 50mm/h
• Power Requirements: 100-240V 50/60Hz
• Printer Dimensions: 22.7cm (L) * 22.7cm (W) * 43.85cm (H)
• Build Volume:  14.343cm (L) * 8.96cm (W) * 17.5cm (H)