Materials for 3D printing - Weight - 750 g
Filament Abaflex PLA - black 750g 1,75mm
Color | Black |
---|
Filament Abaflex PLA - green 750g 1,75mm
Color | Green |
---|
Filament PM ASA - silver (1.75 mm; 0.75 kg)
Color | Silver, Grey |
---|
Filament Abaflex PLA for Bambu Lab - black 750g 1,75 mm
Color | Black |
---|
Filament REFILL Abaflex PLA for Bambu Lab - white 750g 1,75 mm
Color | White |
---|
Filament REFILL Abaflex PLA for Bambu Lab - black 750g 1,75 mm
Color | Black |
---|
Filament REFILL Abaflex PLA for Bambu Lab - red 750g 1,75 mm
Color | Red |
---|
Filament REFILL Abaflex PLA for Bambu Lab - blue 750g 1,75 mm
Color | Blue |
---|
TreeD Filaments Insulating ABS ESD - Black (1.75mm; 0.750kg)
Color | Black |
---|
Filament REFILL Abaflex PLA for Bambu Lab - green 750g 1,75 mm
Color | Green |
---|
Filament REFILL Abaflex PLA for Bambu Lab - gray 750g 1,75 mm
Color | Grey |
---|
Filament Abaflex PLA for Bambu Lab - green 750g 1,75 mm
Color | Green |
---|
Filament Abaflex PLA for Bambu Lab - white 750g 1,75 mm
Color | White |
---|
Filament Abaflex PLA for Bambu Lab - red 750g 1,75 mm
Color | Red |
---|
Filament Abaflex PLA for Bambu Lab - blue 750g 1,75 mm
Color | Blue |
---|
Filament Abaflex PLA for Bambu Lab - gray 750g 1,75 mm
Color | Grey |
---|
Filament Abaflex PLA for Bambu Lab - natural 750g 1,75 mm
Color | Natur |
---|
Filament Abaflex PETG+ for Bambu Lab - gray 750g 1,75 mm
Color | Grey |
---|
Filament Abaflex PETG+ for Bambu Lab - transparent yellow 750g 1,75 mm
Color | Transparent yellow |
---|
Filament REFILL Abaflex PETG+ for Bambu Lab - transparent yellow 750g 1,75 mm
Color | Transparent yellow |
---|
What are the brands of filament?
What are the brands of 3D printing filament and what are their printing results?
Filament drying and storage
Unprotected filament absorbs the humidity in the room and gradually loses its quality. Printing from damp filament is of poor quality and often does not come out at all. This article tells you what to do if your filament gets wet and how to prevent it.
HARZ Labs resin postprocessing
HARZLabs Psyresin Correct Post-Process Chart.
Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.
Print settings for SLA printers
How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.
How to use HARZ Labs UV resin for casting
Recommended procedure for firing Dental Cast Cherry resin. You should follow these recommendations when creating a model for printing.
HARZ Labs: after print
Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended. Casting resins may not be cured for longer than 30 minutes.