Quick info
eSUN Water Washable resineSUN Water Washable resin

eSUN Water Washable resin

In stock
30,55 €
Resin water washable from eSUN is a water-washable resin and has less odor when printing than classic resin for 3D printers

Filament drying and storage

Filament drying and storage

Unprotected filament absorbs the humidity in the room and gradually loses its quality. Printing from damp filament is of poor quality and often does not come out at all. This article tells you what to do if your filament gets wet and how to prevent it. 


HARZ Labs resin postprocessing

HARZ Labs resin postprocessing

HARZLabs Psyresin Correct Post-Process Chart.

Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.


Tiskové nastavení pro SLA tiskárny

Tiskové nastavení pro SLA tiskárny

How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.


HARZ Labs: after print

HARZ Labs: after print

Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended. Casting resins may not be cured for longer than 30 minutes.