Materials for 3D printing
Filament 3D power PET-G - black 1kg
Color | Black |
---|
Filament 3D power PET-G - white 1kg
Color | White, White gloss |
---|
Filament 3D power PLA - black 1kg
Color | Black |
---|
Filament 3D power PET-G - grey 1kg
Color | Grey |
---|
Filament 3D power PLA - white 1kg
Color | White, White matt, White gloss |
---|
Filament 3D power Silk - orange 1kg
Color | Orange |
---|
Filament 3D power Silk - blue 1kg
Sharplayers Basic UV resin 1L + free resin filter
Filament 3D power Silk - red 1kg
Color | Red |
---|
HARZ Labs Industrial ABS Resin
Color | Black |
---|
Filament Abaflex PLA - black 750g 1,75mm
Color | Black |
---|
Filament PM FRJet - white (1.75mm; 0.5 kg)
Color | White |
---|
Filament PM ABS - black (1.75 mm; 1 kg)
Color | Black |
---|
Filament PM 1.75 PLA - transparent 1 kg
Color | Transparent |
---|
Sample - Filament 3D power
PLA for Bambu Lab - white 500g 1,75mm
Color | White |
---|
eSUN eResin PMMA - plexi resin for 3d printers
Color | Transparent |
---|
Filament for 3d pen eMatte red 10m / 27g
Filament PM PET-G - transparent yellow (1.75 mm; 1 kg)
Color | Yellow |
---|
PET-G pro Bambu Lab - white 500g 1,75 mm
Color | White |
---|
Filament Abaflex PLA for Bambu Lab - black 750g 1,75 mm
Color | Black |
---|
Filament PM 1,75 PLA - Copper 2 kg
Color | Metallic, Copper, Orange |
---|
Filament REFILL Abaflex PLA for Bambu Lab - white 750g 1,75 mm
Color | White |
---|
Filament REFILL Abaflex PLA for Bambu Lab - red 750g 1,75 mm
Color | Red |
---|
What are the brands of filament?
What are the brands of 3D printing filament and what are their printing results?
Filament drying and storage
Unprotected filament absorbs the humidity in the room and gradually loses its quality. Printing from damp filament is of poor quality and often does not come out at all. This article tells you what to do if your filament gets wet and how to prevent it.
HARZ Labs resin postprocessing
HARZLabs Psyresin Correct Post-Process Chart.
Proper post-processing of HARZ Labs resin is key to the properties of the printed model. You can learn how to print resin HERE. Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended.
Print settings for SLA printers
How to print from HARZ Labs resin? You will learn how to choose the basic settings of the SLA 3d printer for HARZLabs resin printing. Each printer requires individual settings. Even within one 3D printer model, different settings may be required (mainly applies to SLA printers with DLP technology). We have collected a wealth of information about 3D printer and resin settings for better user comfort and to achieve the highest possible print quality.
How to use HARZ Labs UV resin for casting
Recommended procedure for firing Dental Cast Cherry resin. You should follow these recommendations when creating a model for printing.
HARZ Labs: after print
Curing time depends on the type of resin. For modeling resins, we recommend curing for 10-30 minutes. It is enough that the surface does not stick and the model hardens. To achieve maximum toughness and hardness, the dental resins must be fully cured, a time of 30-60 minutes is recommended. Casting resins may not be cured for longer than 30 minutes.